Conventional Fire Alarm System

[vedard]

Conventional Fire Alarm System consists of zones type conventional fire alarm control panel, repeater floor displayer panel, smoke detector, UV flame detector, heat detector, gas detector, smoke and heat detector.

conventional fire alarm-1.JPG (100.82 KiB) Viewed 16366 times

shop conventional fire alarm component

Conventional fire alarm system.jpg (442.2 KiB) Viewed 1017 times

103 Smoke and Heat Detector.pdf

Conventional Smoke and heat detector

(255.57 KiB) Downloaded 13 times

15-WH116 Con maintenance switch manual.pdf

Fire Security System maintenance switch

(154.55 KiB) Downloaded 17 times

[vedard]

Fire alarm security system control panel has 4 zones, 8 zones or 16 zones conventional fire alarm panel.

conventional fire alarm-2.JPG (89.63 KiB) Viewed 16365 times

Conventional_Photoelectric_Smoke_Sensors.pdf

YT-102 conventional smoke detector

(226.32 KiB) Downloaded 19 times

[vedard]

Conventional fire detection and fire indication panel which has 4 zones, 8 zones or 16 zones. Each zone can equip 25 detectors. You can set one floor or one corner area as one zone. There is floor repeater to show fire floor.

conventional fire alarm-3.JPG (172.07 KiB) Viewed 16365 times

[vedard]

Smoke heat detector is the basic fire detection device. Compatible with all the conventional fire alarm control panel. Unpolarized wire input operation voltage 9-28VDC. Unique optical sensing chamber. Built-in microprocessor intelligent software. Insect resistant screening.

conventional fire alarm-4.JPG (140.47 KiB) Viewed 16365 times

[vedard]

Compatible with all the conventional fire alarm control panel smoke heat detector, sounder strobe, manual call point.

conventional fire alarm-5.JPG (118.12 KiB) Viewed 16365 times

For commercial and industry security system, you can add fire manual call point at public area. When fire occurs, you can pull down the button to report fire. Use the two switch terminal to connect it with alarm panel.

4e04bac87d95f1387b0217fca2c12d68.jpg (50.42 KiB) Viewed 7933 times

20-SB116 Con callpoint Manual.pdf

(125.29 KiB) Downloaded 871 times

[vedard]

Complete conventional fire alarm system bell, horn, beam detector, remote LED indicator, smoke detector testing instrument.

conventional fire alarm-6.JPG (77.32 KiB) Viewed 16365 times

[vedard]

Wire conventional fire alarm control panel with home security system, door contact, PIR motion sensor, telephone dialer etc.

conventional fire alarm-7.JPG (124.18 KiB) Viewed 16365 times

[vedard]

Wire conventional fire alarm system.

conventional fire alarm-8.JPG (96.98 KiB) Viewed 16365 times

[vedard]