Recharge and replace solar beam battery

Perimeter Security system wireless solar power photoelectric beam system installing instruction. Video guidance and user manual for setting up solar power beam system for outdoor yard, wall, balcony security protection.
vedard
Posts: 835
Joined: Wed Dec 05, 2018 12:27 am

Recharge and replace solar beam battery

Unread post by vedard »

IFR14500 500MAh 3.2V LiFePO₄ Rechargeable battery is used for the solar power break beam sensor. The beam has DC charge function. In continuous cloudy and rainy weather, DC charging can be used. The power adapter used is 5-12V, 1A-1.5A. The interface is 5521 with contact length 12mm. It takes four hours to fully charge.

The battery can be replaced when it expires. Just open the back cover of the beam sensor, remove the old battery from the battery holder and replace it with a new one.
battery replace.JPG
battery replace.JPG (36.85 KiB) Viewed 7830 times
T001Q3-inside.jpg
T001Q3-inside.jpg (1.91 MiB) Viewed 7830 times
T001Q3 inside-2.jpg
T001Q3 inside-2.jpg (1.76 MiB) Viewed 7830 times
Shop Focus brand wireless alarm, HB solar power alarm, HST fire alarm at https://www.vedardalarm.com
vedard
Posts: 835
Joined: Wed Dec 05, 2018 12:27 am

Re: Recharge and replace solar beam battery

Unread post by vedard »












Shop Focus brand wireless alarm, HB solar power alarm, HST fire alarm at https://www.vedardalarm.com
Post Reply