Mini conventional fire alarm system

Fire alarm system manual download for studying addressable intelligent alarm contorl panel, fire detection system, fire warning, fire evacuation system.
Post Reply
vedard
Posts: 461
Joined: Wed Dec 05, 2018 12:27 am

Mini conventional fire alarm system

Post by vedard »

2 zones master and slave fire alarm control panel is microprocessor controlled and has 1 alarm sound output zones.(bell zone), a 24V supply energized on fire, one set of volt free changeover contacts which operate on fault, and two sets of volt free changeover contacts which operate on fire.
Conventional fire alarm system is suitable for small places
But for small place, such as hotel, villa, resident security, conventional fire alarm system is still suitable and convenient for installation and maintenance. Conventional fire alarm system is reliable as well and it is still used to control relay contact type device such as draught fan, water pump.
2-zone mini type conventional fire alarm control panel is very suitable for small business fire security. It has 2 zones and each zone can equip maximum 25 detectors. The panel has zone1 alarm, zone2 alarm and NAC alarm, zone1 fault, zone2 fault, NAC fault indication. Evacuate, silence, test/reset buttons can be operated on the panel. So, the fire security guard can easy understand the alarm information and operate the alarm panel to warn people of the fire event. Fire location can be easy found and fire extinguishing measure be taken cause the place is small. So, mini type conventional fire alarm system is very suitable for small business place such as hotel, villa, showroom, store. AC90-270V power supply with lead-acid backup battery and 1 alarm sound output zones (bell zones), which can equip max.16 sounders. The mini type fire alarm panel can expand to 4 zones, 6 zones etc. By adding slave alarm panel via RS485 connection.
Shop it at https://vedardalarm.com/fire-alarm-control-panel-2-zones-conventional-fire-communication-p-115
Conventional detector is universal and can be used for any type conventional fire alarm control panel. There are smoke / heat /smoke &heat detectors or 4-wire smoke detector with relay output. The detector can be equipped with shutter door control box as well. When the detector alarms, the signal is fed back to the controller. The remote LED can be connected to the detector for clear view if the detector is installed in hidden place such as attic.
https://vedard.com/blog/conventional-fire-alarm-system-is-suitable-for-small-places
Attachments
2 zones conventional fire alarm system.JPG
2 zones conventional fire alarm system.JPG (144.55 KiB) Viewed 264 times
CP1002MiniSystem.pdf
(1.51 MiB) Downloaded 56 times
CP1002Manual.pdf
(208.33 KiB) Downloaded 47 times
Shop Focus brand wireless alarm, HB solar power alarm, HST fire alarm at https://www.vedardalarm.com

Post Reply