Networking Alarm System

[vedard]

Networking Alarm System consists of Alarm Center Software and User Alarm Devices. The system using Internet communication,and we have our own Internet Server,so the system is much more intelligent and stable, the responds time will be shorter.
Alarm Center Software can realize Baidu Map,Electric Map and Video Surveillance functions. User Alarm Devices are Solar and Wireless,using GPRS/WiFi/LAN to report the alarm information to the alarm center and the user,and the alarm center and the user also can remote control the user alarm devices by Software and App.
[attachment=0]network alarm.jpg[/attachment]

Security service center can choose to build their own server or not. If not, just install the software we provided on the monitor PC. The alarm message sent from alarm control panel to alarm receive PC directly.

[vedard]

Connect All your security sensors and alarm control panel to alarm center. Alarm center will monitor the whole security system via windows software. Just install the software on PC, register the equipment to the center. There is electric map to show all alarm information.

Alarm Center Manual.pdf

(823.59 KiB) Downloaded 992 times

[vedard]

HB-ZFQ is used for wireless long range repeater. It can prolong the wireless transmission distance to 800-1000m with one repeater.

[vedard]

Yes, different sensor can have different tone,please setup as below:
1. activate the first sensor
2. press the "Tone" button to select a tone for the first sensor.
3. activate the second sensor
4. press the "Tone" button to select a tone for the second sensor. ”

[vedard]

Actually, the volume of the receiver is adjustable, please operate as below:
1. power on the receiver
2. press and hold the ON/OFF button first, and then press the "Tone" button once to adjust the volume level, total 4 volume levels adjustment.
Hope it helps and please contact us if any other questions. ”

[vedard]

485 network TCP/IP communication module can be added to the alarm control panel.