Installation notes for solar wireless beam

Question you may have and answer you may need before shopping home security system.
Post Reply
vedard
Posts: 587
Joined: Wed Dec 05, 2018 12:27 am

Installation notes for solar wireless beam

Post by vedard »

1. The solar wireless beam should be installed outdoor.
2. The solar wireless beam should not be installed at dark place. If the maximum illumination of the installed place is less than 2000LX during the day, external power cord should be connected.
3. The solar wireless beam is not suitable for use in places such as gate passageway where the alarm is triggered more than 20 times a day. But there is low power comsumption outdoor detector such as HB-T704 and HB-T705 can be used.
4. In order to enable infrared light to send to longer distance, this product is designed with a smaller Angle of light, so it needs to be more accurate in light matching during installation, and the mounting bracket is required to be firm and not shaken, otherwise it may cause failure. You can use laser pointer to calibrate the beams.
Shop Focus brand wireless alarm, HB solar power alarm, HST fire alarm at https://www.vedardalarm.com
RaSFal
Posts: 1
Joined: Mon Aug 02, 2021 5:18 am

-

Post by RaSFal »

we have the code to enter at the specials menu, but we do not know where on the specials menu to enter this code and how do you enter letters. Thanks for the patience, this is all new to us.
vedard
Posts: 587
Joined: Wed Dec 05, 2018 12:27 am

Re: about the code of solar beam and detector

Post by vedard »

RaSFal wrote: Mon Aug 02, 2021 11:04 pm we have the code to enter at the specials menu, but we do not know where on the specials menu to enter this code and how do you enter letters. Thanks for the patience, this is all new to us.
Hi! Yes, each detector has a code. And the detector should be learned into the alarm panel. So, when the detector triggers alarm, the alarm panel will receive it and send out report to mobile phone, security service center etc.
About how to enter this code, please refer to relative alarm panel or receiver manual. Follow the steps of learning a detector. It may not need to enter the code but trigger the detector at learning detector step.
Shop Focus brand wireless alarm, HB solar power alarm, HST fire alarm at https://www.vedardalarm.com
Post Reply