How to install solar power 8 beam detector

[vedard]

The installation and use of 8-beam solar infrared beam mainly involve the following aspects:

1. Installation method: The installation methods for infrared beam include pillar installation and wall installation. In pillar type installation, the shape of the pillar can be 1-shaped, Z-shaped, or curved, and the key is that the pillar must be firmly fixed without displacement or shaking. Wall mounted installation supports direct installation of probes on the outer walls, walls, or fences of buildings, providing a horizontal 180 degree all-round angle and a tilt angle of more than 20 degrees to reduce false alarms.

install beam.jpg (98.23 KiB) Viewed 281 times

2. Installation location: In order to reduce false alarms, the infrared beam detector set on the channel should generally be at least 50cm above the ground. The infrared beam set on the fence can be installed on both the top and side. When installing on the top, the beam should be 25cm higher than the fence or the top of the fence to reduce false alarms caused by birds, cats, etc. Side installation refers to installing the probe on the side of the fence or enclosure near the top, which can avoid interference from the activities of birds and cats.

3. Technical parameters: The anti false alarm ability of the 8-beam infrared beam is stronger than that of the dual beam, and the dual beam is stronger than the single beam. The shading time should be adjusted to a faster position to respond quickly to illegal intrusion.

[vedard]