Wireless Fire Alarm System

[vedard]

When the panel receives the sounder command from other fire alarm equipment, the panel activates the siren through wireless signals, and the siren emits sound and light signals to achieve the purpose of sounder.

TCSG5416W Wireless Sounder Installation manual_V1.3-20210205.pdf

(302.42 KiB) Downloaded 359 times

[vedard]

When the fire pump is manually confirmed to start, press the start button on the fire hydrant button, the fire hydrant button is always on, and it can be sent to the controller through wireless communication technology Start the signal and start the fire pump at the same time; after the fire pump has been started, the fire hydrant button answer light is always on, the fire hydrant button sends an answer signal to the controller through wireless communication technology, and the fire hydrant button enters the state of waiting for the controller to reset. The controller can display the coded information of the fire hydrant button and make a sound.

TCXH5415W Wireless fire hydrant buttonInstallation  instructions_V1.1_20110601.pdf

(339.94 KiB) Downloaded 308 times

[vedard]

The signal extender uses advanced wireless transceiver technology, built-in efficient anti-collision algorithm and can set filtering rules, so that the signal extender can work reliably in the system. At the same time, the signal extender supports multiple groups of channels, so that the signal extender can work in complex environments and in the presence of multiple control panels, realizing mutual non-interference, truly avoiding the collision of channels, and greatly improving the coverage of wireless networks.

TC-ZJ402 wireless signal extender.pdf

(147.23 KiB) Downloaded 308 times

[vedard]

Wireless fire alarm control panel can equip up to 64 addressable detectors, manual call point, smoke detector, heat detectors with 1 loop. All the wireless addressable detectors can be easy registered to the FACP by wireless communication process.
No wiring and professional wireless fire alarm system can be used for residential fire security, commercial security.
The wireless FACP is with full functions of fire alarm and fire linkage.
From the panel, the system working status is indicated. It is with built-in printer to print report.
The smoke exhaust, fan valve, hydrant can be linked to start or stop automatically.
Step by step guide is provided for the installation and debugging of the professional wireless fire alarm system.
Complete wireless fire alarm system is at Wireless fire alarm.

wireless fire alarm installation and debugging procedures.pdf

(5.6 MiB) Downloaded 5 times

wireless-fire-alarm-1.png (100.49 KiB) Viewed 9 times