How to upgrade EAVS from 2.0 to 3.0

Meian tech Focus brand wireless smart home automatic burglar alarm, emergency alarm, remote monitor system for home security. How to program the wireless alarm system? Learn it here.
Post Reply
vedard
Posts: 436
Joined: Wed Dec 05, 2018 12:27 am

How to upgrade EAVS from 2.0 to 3.0

Post by vedard »

There are 3 parts to upgrade EAVS from 2.0 to 3.0
1. FOCUS-DVR-ONVIF
2. FOCUS-DVR-APP
3. DVR_GSM_PANEL
update via IE , IE should be 32 digitals
1. log in EAVS via IE browser, setting-system setting-basic setting-channels mode-4*960H. save, restart
2. log in EAVS via IE browser, setting-system setting-device upgrade-alarm type-eavs-select file FOCUS-DVR-ONVIF-click device upgrade, auto upgrade and restart twice
3. log in EAVS via IE browser, setting-system setting-device upgrade-alarm type-eavs-select file FOCUS-DVR-APP-click device upgarde, auto upgrade and restart, it takes longer to restart
4. log in EAVS via IE browser, download EAVSOCX controls, close all IE, run this controls, reopen IE and log in EAVS, allow EAVSOCX controls running.
5. log in EAVS via IE, menu-system setting-update backup-alarm type-alarm panel-select DVR_GSM_PANEL-click device upgrade, auto upgrade and auto restart.
6. log in EAVS via IE, menu-system setting-factory setting-select all-saving-update, EAVS auto restart

Note: 1. PC and EAVS can't be power off and connection cut off during upgrade time.
2. If EAVSOCX controls can't be installed, please close all virus killer software, lower IE security grade, IE-intelnet option-security-custom setting grade-ActiveX controls and plug-in, all on
3. Update from 2.0 to 3.0 doesn't support U disk uprade directly.
Attachments
EAVS Alarm Software Upgrade.mp4
(8.94 MiB) Downloaded 22 times
Shop Focus brand wireless alarm, HB solar power alarm, HST fire alarm at https://www.vedardalarm.com

Post Reply