Solar power wireless outdoor security solution

Meian tech Focus brand wireless smart home automatic burglar alarm, emergency alarm, remote monitor system for home security. How to program the wireless alarm system? Learn it here.
vedard
Posts: 837
Joined: Wed Dec 05, 2018 12:27 am

Solar power wireless outdoor security solution

Unread post by vedard »

PIR and MW outdoor intruder detector has strong ability of anti environment interference.
FT-89R has more functions of anti-mask, tamper-resistant, 3-dimensional protection area with 12m*12m wide angle.
There is FT-89SR solar power wirless type as well.
Enterior security is important and essential for residential security, commercial security and industry security.
So, many types enterior security equipment, perimeter security alarm device, detection systems are designed for the purpose.
There are two types of outdoor security equipment. One is beam system which covers an invisible barrier for entrance protection such as garden, yard, farm.
farm-security.jpg
farm-security.jpg (84.78 KiB) Viewed 5984 times
Another is PIR and MW double technology Intrusion Detector for a detection area such as 12m *12m.
These two types enterior security equipment can be used according to protection area feature and needs. And they can be combined used as well.
FT-89.pdf
(656.35 KiB) Downloaded 560 times
Focus alarm Meian tech security system outdoor wireless burglar alarm. Easy installing professional security systems for complete home security.
FT-89SR scene alarm system.jpg.png
FT-89SR scene alarm system.jpg.png (193.28 KiB) Viewed 2329 times
https://www.youtube.com/watch?v=UBGMHoG-Ris[/Videoplayer]
Last edited by vedard on Wed Nov 30, 2022 3:55 pm, edited 1 time in total.
Shop Focus brand wireless alarm, HB solar power alarm, HST fire alarm at https://www.vedardalarm.com
vedard
Posts: 837
Joined: Wed Dec 05, 2018 12:27 am

PIR Passive Infrared Detector installing notice

Unread post by vedard »

Passive infrared detector PIR is a type of weak signal detection equipment. There are some notices for attention when install it. For example, the installing height and sensitivity are two key points for attention. There are three steps to prepare and install a PIR detector.
Step 1: Well understand the performance characteristics of the PIR detector.
Step 2: Correctly determine the location for PIR detector installation.
Step 3: Carefully adjust and debug the infrared detector.
Below is the details for attention.
A. Installing location:
1. Determine the correct installing height and angle according to PIR installing instruction manual and using requirement, environment. The protection area, sensitivity and pet immunity effectiveness is different with different installing height. Find out the entrance and exit of the building and intrusion routine, install the detectors at places to cover the areas.
2.Do not install the PIR detector facing glass doors and windows.
PIR detector can anti interference of white light but not 100%. And outdoor passing people and vehicle may cause false alarm. PIR and MW double technology detector can be installed at this place without interference.
3. Do not install the PIR detector facing cold and hot air outlets or cold and heat sources.
PIR detector senses object’s temperature change and triggers alarm. So the air flowing from cold or heat outlet may cause false alarm. If you have to install the detector at these places, you can choose PIR and MW double technology detector.
4. Do not install the PIR detector facing a swinging object. A swing object may cause false alarm by Microwave detector as well.
PIR-installing.jpg
PIR-installing.jpg (7.91 KiB) Viewed 5974 times
B: Detector choosing and debugging
1.Correct choosing of detector.
There are various types of PIR detector. They are wide angle PIR or curtain PIR with 6m to 60m detection distance, infrared sensor or Microwave sensor, wall mounted or ceiling mounted. It should be correctly chosen according to protection space, intrusion routine characteristics, environment features.
2.Debugging
Debugging is absolutely necessary work after installing of motion sensor. There are two ways for debugging. One way is walking test. The test person walks in the protected area with S routine to check the protected area. The microwave sensor sensitivity and PIR sensor sensitivity should be adjusted separately. Sometimes the sensitivity should be adjusted again in different season. Microwave has penetrability and the sensitivity can not be set too high.
Another way is using instrument to measure. Some detector has noise voltage output interface. Using a multiple meter to measure the noise voltage and adjust the sensitivity.
Shop Focus brand wireless alarm, HB solar power alarm, HST fire alarm at https://www.vedardalarm.com
vedard
Posts: 837
Joined: Wed Dec 05, 2018 12:27 am

How to enroll PB-205R wireless repeater

Unread post by vedard »

PB-205R is Focus brand wireless convertor. It is used for the long distance transmission in the enrironment of strong obstancle. It can amplify the signal to the panel. Up to 60 detectors signal can be transmitted. It has tamper resistant switch for itself security.
It is AC power supplied with backup battery.
Read the PB-205R manual and learn how to enroll the repeater to Focus alarm system via video.
Attachments
PB-205R Level setup.mp4
(10.01 MiB) Downloaded 414 times
PB-205R Enroll.mp4
(2.31 MiB) Downloaded 422 times
PB-205R wireless convertor.pdf
(391.05 KiB) Downloaded 457 times
Shop Focus brand wireless alarm, HB solar power alarm, HST fire alarm at https://www.vedardalarm.com
vedard
Posts: 837
Joined: Wed Dec 05, 2018 12:27 am

how to install outdoor PIR

Unread post by vedard »

Shop Focus brand wireless alarm, HB solar power alarm, HST fire alarm at https://www.vedardalarm.com
Post Reply