Why does the alarm panel keeps automatically arm and disarm

Home security system setting, operation troubleshooting. Help installing wireless wired home security system.
vedard
Posts: 837
Joined: Wed Dec 05, 2018 12:27 am

Why does the alarm panel keeps automatically arm and disarm

Unread post by vedard »

Why does the alarm panel keeps automatically arm and disarm?
Maybe a probe in the system is constantly sending out alarm codes.The solution is to disconnect the power supply of each probe in the system one by one. When the host machine returns to normal after the probe is disconnected, it indicates that the probe has a fault and needs to be replaced or repaired.
Shop Focus brand wireless alarm, HB solar power alarm, HST fire alarm at https://www.vedardalarm.com
vedard
Posts: 837
Joined: Wed Dec 05, 2018 12:27 am

Wireless communication distance shortened

Unread post by vedard »

Maybe one of the probes in the system has fault and continuously send code, and the receiving distance becomes closer due to mutual interference with the same frequency.
The solution is to disconnect the power supply of each probe in the system one by one. If the power supply of each probe is disconnected, the wireless distance becomes longer, indicating that the probe has a fault and needs to be replaced or repaired.
Shop Focus brand wireless alarm, HB solar power alarm, HST fire alarm at https://www.vedardalarm.com
trekelectronics
Posts: 1
Joined: Mon Jun 22, 2020 12:44 pm

Re: Why does the alarm panel keeps automatically arm and disarm

Unread post by trekelectronics »

Possibly one of the tests in the framework has blame and consistently sends code, and the accepting separation turns out to be nearer because of common obstruction with a similar recurrence.
Post Reply