App control network alarm panels

Perimeter Security system wireless solar power photoelectric beam system installing instruction. Video guidance and user manual for setting up solar power beam system for outdoor yard, wall, balcony security protection.
Post Reply
vedard
Posts: 387
Joined: Wed Dec 05, 2018 12:27 am

App control network alarm panels

Post by vedard » Wed Jan 16, 2019 8:26 am

Networking Alarm Panel(HB-4040G/R)
Features:
◆99 wireless zones.
◆GPRS/WiFi/LAN Communication.
◆Backup rechargeable battery inside.
◆Support Ademco contact ID.
◆1 group DC12V output.
◆App operation,remote control the alarm panel by App.
◆Troubleshooting tips(low battery,invalid,battery damaged and etc).
◆Alarm voices optional.
◆HB-4040G GPRS Communication
HB-4040W WiFi Communication
HB-4040R LAN Communication
4040GR.jpg
4040GR.jpg (527.63 KiB) Viewed 857 times
4040RG app.jpg
4040RG app.jpg (62.01 KiB) Viewed 856 times
Technical Parameters
Working Voltage AC220V+15% 50Hz, DC12V-13.8V
Working Current Static Current≤75mA Alarming Current≤300mA
Working Temperature Range -10℃~50℃
Wireless Frequency 433MHz FSK+FHSS
GSM 900MHz/1800 MHz/1900 MHz/2100 MHz (HB-2050G)
WiFi 2.412GHz-2.484GHz (HB-5050W)
Dimension 103x110x49(mm)
Shop Focus brand wireless alarm, HB solar power alarm, HST fire alarm at https://www.vedardalarm.com

vedard
Posts: 387
Joined: Wed Dec 05, 2018 12:27 am

Re: App control network alarm panels

Post by vedard » Wed Jan 16, 2019 8:29 am

Networking Alarm Panel(HB-2050G/W)
◆99 wireless zones.
◆GPRS/WiFi Communication.
◆Backup rechargeable battery inside.
◆Support Ademco contact ID.
◆1 group DC12V output.
◆App operation,remote control the alarm panel by App.
◆Troubleshooting tips(low battery,invalid,battery damaged and etc).
◆Alarm voices optional.
◆HB-2050G GPRS Communication
HB-2050W WiFi Communication
HB-2050G.jpg
HB-2050G.jpg (18.61 KiB) Viewed 854 times
Technical Parameters
Working Voltage AC220V+15% 50Hz, DC12V-13.8V
Working Current Static Current≤75mA Alarming Current≤300mA
Working Temperature Range -10℃~50℃
Wireless Frequency 433MHz FSK+FHSS
GSM 900MHz/1800 MHz/1900 MHz/2100 MHz (HB-2050G)
WiFi 2.412GHz-2.484GHz (HB-5050W)
Dimension 103x110x49(mm)
Shop Focus brand wireless alarm, HB solar power alarm, HST fire alarm at https://www.vedardalarm.com

vedard
Posts: 387
Joined: Wed Dec 05, 2018 12:27 am

HB-5050G/R TCP/IP network or 4G network with app control alarm panel

Post by vedard » Wed Jan 16, 2019 8:30 am

Perimeter Security Solution with app monitor wireless solar power beam break alert system.
Easy install the beam transmitter and receiver terminals on fence, courtyard, garden, driveway to create invisible light wall. When someone intrudes the light wall, the beam sensor will send alarm report to wireless receiver, the app monitor control panel.
So, intrusion will be notified on app on ios and android app notification.
App monitor alarm control panel has TCP/IP version (RJ45 interface), 2G version and 4G version.
TCP/IP version has app monitor only.
2G or 4G version can set alarm notification phone number and can send SMS and voice call for alarm report.
Package includes:
1* pair 3-beams solar power photoelectric beam sensor, with fixing bracket, but no pole included.
You may need to shop the pole from your local market.
Pole size is: diameter 3.7cm
details:
100m infrared distance solar powered intrusion barrier used for school, workshops, perimeter fencing of residential quarters etc. New technology wireless beams detector anti same frequency interference hop-frequency technology. Wireless beams detector solar power supply. Updated with LCD calibrator and DC power supply for charging if long time no sunshine.
Functions and Specification:
1.It is a solar-powered wireless product and should be installed at place with sunlight intensity more than 2200lux.
2.It is triple beams wireless outdoor infrared detectors working by pairs of transmitter and receiver.
3.Irradiation distance:100m
4.Wireless transmitting distance:800-1000m at open area
5.Wireless frequency:433MHz
6.Maximum alarm times in 24 hours:<=50times
7.Infrared light beam number: 3 beams
8.Battery capacity: transmitting terminal: 500mAh, receiving terminal: 1000mAh
9.Working temperature: -30℃~70℃
10.Working voltage:3.3V
11.Power storage type: LiFePO4 Battery
12.Static working current: transmitting terminal<=0.5mA, receiving terminal<=0.5mA
13.Infrared light frequency: secondary modulation & encoding based on 38KHz
14.Infrared light wave-length: 940nm+/-20nm
15.Output current of solar panel: Under the condition of 1800Lux lighting >=2mA (Outdoor illumination in ordinary rainy or cloudy days is about 2000Lux)
16.Dimension:340*84*45mm
17.Distance between infrared light hole: 35mm
18.Updated with electric power recharging jack

1* set HB-5050R/G
HB-5050R TCP/IP network with app monitor and app setting, controlling, operation for the control panel.
HB-5050G 2G or 4G GSM/GPSN network with app control, monitor, setting, operation and SMS alarm text sending, voice alarm calling.
details:
HB-5050G (2G), HB-5050G (4G), HB-5050R metal case alarm panel is compatible with solar power perimeter security system.
1. HB-5050G (2G) is 2G sim card communication network alarm panel
2. HB-5050G (4G) is 4G sim card communication network alarm panel.
3. HB-5050R is TCP/IP network RJ45 interface alarm panel.
Functions:
1.99 zones for zone type: normal, emergency, fire, help, gas and water. Each zone can equip 1 detector, sensor or remote controller.
2.Total 4 groups phone number can be set.
3.SMS message write and read function.
4.Maximum 4 remote controllers can be used.
5. 2groups arm/disarm timing can be set.

Power interface: DC15V 1.5A (power adaptor)
Backup battery: 12V 1.3Ah lead-acid battery (not included)
Wireless frequency: 434.6MHz FSK
GSM frequency: 900/1800/1900/2100MHz
Dimension: 165*175*62mm

Phone configuration:
smart phone above android 4.0 operating system
>=2G RAM, >=2G storage memory

How to choose active infrared beams
There are different beams quantity such as 2 beams, 3 beams, 4 beams, 6 beams and 8 beams of photoelectric beam sensor. So, how many beams should I choose? The more beams means higher of protection height and longer of detection distance. For example, if the distance between two infrared holes is 35mm, then, for 3 beams sensor, the protection height is 70mm. For 4 beams sensor, any two neighbor beams are blocked, it will trigger alarm. Same for 6 beams or 8 beams sensor. So more beams will be with more security such as for bank. More beams means more power of infrared beam transmission and with stronger penetration to against interference of fog, sunshine etc.
And what does the infrared detection distance mean? It means the distance between the transmission terminal and receiving terminal. The actual installation distance should be less than 80% of the specified distance. For example, the specified detection distance is 100m, then the actual installation detection distance should be less than 80m. If no interference, the detection can reach to 6 times of specified distance. (6*100=600m). But environment interference should be considered for using.
There are some rules for active infrared beam installation. For example, if the beam sensor is installed on a low wall, the distance between the top of the wall and the lowest infrared hole should be around 150mm. Because the size of a normal person is 500mm(width)*200mm(thickness), that will avoid intrusion of people from bottom side of the beam sensor and false alarm triggered by small animals.
HB solar power infrared beam system can be easy calibrated.
1. Make sure that the eye can see the other end through the mechanical calibration hole at one end.
2. Ensure that the LCD displayed figures are large and stable.
Attachments
5050.jpg
5050.jpg (16.39 KiB) Viewed 854 times
Shop Focus brand wireless alarm, HB solar power alarm, HST fire alarm at https://www.vedardalarm.com

vedard
Posts: 387
Joined: Wed Dec 05, 2018 12:27 am

Where to get app and what sim card is used

Post by vedard » Sat Mar 14, 2020 9:26 am

For IOS version, please search for solar safe and you can get app with name solarsafe. For android version, please scan the QR code on the back of the panel. Re-scan the QR code and re-download the app if there is update available.
The app can be used to arm/disarm the alarm panel and send "SOS" message to other person linked to the same alarm panel. When alarm goes off, the app will receive prompt alarm message from app with sound hint. Open the app, the alarm type, alarm zone, alarm time will show up. 100 history records are stored for check. It support maximum 6 family members to use the app to control the alarm panel and 2 members can be online at the same time.
For GSM/GPRS network alarm panel, please check with us which network operator's sim card is available for your country. For example, T-Mobile sim card is available for using in USA.
Shop Focus brand wireless alarm, HB solar power alarm, HST fire alarm at https://www.vedardalarm.com

Post Reply