Automatic marine fire alarm & Water-based cabin fire extinguishing control system

Fire security design for garage, motor repair shop and parking area. Fire security alarm and explosion proof design for chemical factory, oil field etc.
vedard
Posts: 837
Joined: Wed Dec 05, 2018 12:27 am

Automatic marine fire alarm & Water-based cabin fire extinguishing control system

Unread post by vedard »

BS10 Automatic Fire alarm controller is integrated entire ship cabin fire alarm and water mist fire extinguishing controller.
The main performance index
Meets the requirements of MSC.1/Circ.1387 in Chapter 9 of the FSS Code. It can be used for fixed local water-based fire extinguishing systems in Category A machinery spaces.
Wiring system
Two-wire ring-distributed, non-polarity
Capacity
127 × 8(Loop) = 1016 Maximum addressing capacity
Transmission distance
≤ 1500 meters
Quadratic Programming
In addition to display the alarm address, the alarm point can display the alarm location described by textual
APOLLO bus device 126*4 circuit
=504 Maximum addressing capacity
LCD screen with multi-information on the same screen
Chinese and English bilingual conversion
Two kinds of installation options
Wall mounted, Flush mounted
BS10-system fire detectors adopt digital value transmission and floating threshold value processing technology, and their basic difference from normal fire detectors is that they have no fixed alarm threshold, i.e. when the environment changes or a detector is contaminated by the environment, its internal intelligent algorithm will automatically identify and adjust the alarm threshold to adapt to the new environment and condition, so the function of threshold drift compensation enables every fire detector to has a sensitivity relatively constant to external environment.
Attachments
marine fire extinguishing system.png
marine fire extinguishing system.png (350.9 KiB) Viewed 3091 times
Shop Focus brand wireless alarm, HB solar power alarm, HST fire alarm at https://www.vedardalarm.com
Post Reply