Vedard Security Alarm Technical Support

◎ Support mobile phone APP and cloud platform system.

◎ Adopt a new generation of high-speed M4 processor.

◎ The system has a storage history function.

◎ Single host can connect up to 255 bus devices.

◎ Connect 470M wireless bus device.

◎ Connect the wired bus device.

◎ With home networking function.

◎ WIFI internet function.

◎ GPRS automatic call function, support mobile / Unicom mobile phone card.

◎ It can realize the networking function with the TC5000 series host.

◎ Connect ZIGBEE bus device function.

[attachment=0]wireless fire alarm control panel.jpg[/attachment]

[attachment=0]wireless fire alarm system.jpg[/attachment]

TCDK-1A11 Single-line AC Voltage/Current Sensor for Single-phase

Input current: rating current AC 5A; setting range (0-8A)

Input voltage: rating value AC 220V; setting range (0-280V)



TCDK-1A31 Single-line AC Voltage/Current Sensor for Three-phase and Three-wire System

Input current: rating current AC 5A; setting range (0-8A)

Input voltage: rating value AC 380V; setting range (0-460V)



TCDK-1A41 Single-line AC Voltage/Current Sensor for Three-phase and Four-wire System

Input current: rating current AC 5A; setting range (0-8A)

Input voltage: rating value AC 220V; setting range (0-280V)



TCDK-1D11 Single-line DC Voltage/Current Sensor

Input current: rating current DC 7A; setting range (0-12A)

Input voltage: rating value DC 24V; setting range (0-50V)



Use lattice LED, easy operation and friendly to use.

Electronic coding which can be programmed by a programmer in advance, reliable for engineering commissioning.

CPU with low power consumption will monitor the running status and will send two modes of normal and fault to the main monitor.

Upload the status values of current devices at real time.

Wire: electrodeless two-wire signal line is used in the connection with the control panel; power lines use electrodeless two-wire lines.

Dimensions: 110mm×92mm×67mm

[attachment=0]voltage current sensor.jpg[/attachment]

Used with electrical fire monitoring detectors
Indoor temperature monitoring detector such as planting shed

[attachment=0]temperature sensor.jpg[/attachment]

Humidity and temperature sensor

High precision and good stability.

Integrated design of sensing and transducing.

Suitable for temperature and humidity measuring in HVAC indoor environment and ventilation pipe.

Measuring range: humidity: 0%RH~100%RH, temperature:-40℃~120℃

[attachment=0]humidity and temperature sensor.jpg[/attachment]

◎ Detector category: A2R

◎ Battery voltage: CR123A

◎ Operating current: polling current ≤ 15uA; alarm current ≤40mA

◎ Coding method: the panel automatically allocates when networking

◎ Communication: 470MHz FSK coded two-way communication

◎ Communication distance: ≤300m

◎ Wireless transmission power: 19dbm

◎ Protection area: When the space height is less than 8m, the protection area is 20㎡ to 30㎡

◎ Dimensions: D 100mm; H 54mm (with base)

◎ Weight: About 96g (with battery)

[attachment=0]wireless heat detector.jpg[/attachment]

◎ Using advanced wireless communication technology

◎ Star networking technology with the host

◎ With battery voltage and low voltage detection, it can inform the user of the battery status in time Battery voltage: CR123A

◎ Operating current: polling current ≤15uA; alarm current ≤40mA

◎ Coding method: the panel automatically allocates when networking.

◎ Communication: 470MHz FSK coded two-way communication

◎ Communication distance: ≤300m

◎ Protection area: When the space height is less than 8m, the protection area is 20㎡ to 30㎡

◎ Weight: About 110g (including battery)

◎ Dimensions: D 100mm; H 54mm (with base)

[attachment=0]wireless smoke detector.jpg[/attachment]

◎ Press-type structure design, automatic rebound after the alarm switch is pressed

◎ Battery Model: CR123A

◎ Operating current: polling current ≤ 3uA, alarm current ≤ 15mA

◎ Coding method: the panel automatically allocates network

◎ Communication: 470MHz FSK coded two-way communication

◎ Communication distance: ≤300m

◎ Wireless transmission power: 19dbm

◎ Reset method: panel reset

◎ Weight: about 97g (with battery)

◎ Overall dimensions: 87mm×87mm×44mm

[attachment=0]wireless push button.jpg[/attachment]

◎ Operating voltage: AC220V/50Hz

◎ Operating current: polling current ≤ 3mA, alarm current ≤10mA

◎ Sound pressure level: the initial sound is less than 45dB, after the sound pressure is stable 75dB~115dB

◎ Transposition cycle: 3.5S~4.5S

◎ Flash frequency: 1Hz~2Hz

◎ Coding method: the panel automatically allocates network

◎ Communication: 470MHz FSK coded two-way communication

◎ Communication distance: ≤300m

◎ Reset method: panel reset

◎ Weight: about 135g

◎ Dimensions: diameter 86mm, height 61mm

[attachment=0]wireless sounder.jpg[/attachment]

◎ Operating voltage: AC220V/50Hz

◎ Operating current: polling current ≤4mA, alarm current ≤10mA

◎ Detection Gas: Natural Gas

◎ Ndependent sound and light alarm function

◎ Coding method: the panel automatically allocates network

◎ Communication: 470MHz FSK coded two-way communication

◎ Alarm setting value: 8% LEL

◎ Output mode: A group of DC9V active pulse output

◎ Communication distance: ≤300m

◎ Sensor life: 5 years (typical)

◎ Weight: about 105g

◎ Dimensions: Diameter 80mm, Height 52mm

[attachment=0]wireless gas detector.jpg[/attachment]