Installing fire alarm system easy with video guidance.
Learn how to install fire alarm system at vedard.com/forum
Shop fire alarm system at
fire alarm store online.
Harmful gas monitoring and control is important part of security system for industry security. Automatic gas controller solenoid, exhaust fan will be started with programming after gas leakage is detected.
The gas monitor and control system is easy to wire and program with a few steps.
1. Wire the gas monitor control panel with explosion-proof gas detectors.
2. Wire the exhaust fan with the gas monitor control panel.
3. Wire the solenoid valve with the gas monitor control panel.
4. Set the alarm high value and low value of the gas leakage concentration.
5. Set the linkage device for the detector.
6. You can bypass the detector if there is fault.
7. You can query the alarm and system information.
8. The system has self check function.
9. You can connect the alarm monitor system to central fire security monitor system.
Learn how to wire and program combustible gas, toxic gas leakage monitor and control system at
https://www.youtube.com/watch?v=quaf0fSBIpg
- gas leakage monitor.JPG (76.97 KiB) Viewed 4065 times