How to wire fire automatic fighting system?

Fire alarm system manual download for studying addressable intelligent alarm contorl panel, fire detection system, fire warning, fire evacuation system.
Post Reply
vedard
Posts: 407
Joined: Wed Dec 05, 2018 12:27 am

How to wire fire automatic fighting system?

Post by vedard »

How to wire Fire intelligent control panel with various fire detection, fire fighting, fire monitor device? There are various types of modules for the connection.
1. Short-Circuit-Isolator module. This module is used to temporarily isolate the fault detector, input-output module or call point etc. from the system. So, the fire alarm system can keep working properly without interruption.
GL-957short-circuit-isolator.jpg
GL-957short-circuit-isolator.jpg (37.16 KiB) Viewed 863 times
2. Input module. There are two types input modules. One is to connect conventional type smoke heat detector, gas sensor, manual call point, hydrant button.
JK-952input module.jpg
JK-952input module.jpg (38.69 KiB) Viewed 859 times
JS-951input module.jpg
JS-951input module.jpg (40.1 KiB) Viewed 859 times
3. Output module. Output module is used to connect fire warning device such as ceiling speaker, wall speaker. According to drive current and voltage, there are various type output module and input/output module to connect with various types output device.
Shop Focus brand wireless alarm, HB solar power alarm, HST fire alarm at https://www.vedardalarm.com

vedard
Posts: 407
Joined: Wed Dec 05, 2018 12:27 am

Re: How to wire fire automatic fighting system?

Post by vedard »

KZ-953output module.jpg
KZ-953output module.jpg (29.98 KiB) Viewed 855 times
4. Input output module for non-fire-elevator
KZJ-956input-output module (for non-fire-elevator).jpg
KZJ-956input-output module (for non-fire-elevator).jpg (91.27 KiB) Viewed 855 times
5. Input output module for rolling door control
KZJ-956input-output module (for rolling door control).jpg
KZJ-956input-output module (for rolling door control).jpg (88.97 KiB) Viewed 855 times
6. Input output module for fire lift
KZJ-956input-output module (for rolling door control).jpg
KZJ-956input-output module (for rolling door control).jpg (88.97 KiB) Viewed 855 times
Shop Focus brand wireless alarm, HB solar power alarm, HST fire alarm at https://www.vedardalarm.com

vedard
Posts: 407
Joined: Wed Dec 05, 2018 12:27 am

Re: How to wire fire automatic fighting system?

Post by vedard »

6. Input output module for fire lift
KZJ-956input-output-module(for fire lift).jpg
KZJ-956input-output-module(for fire lift).jpg (93.23 KiB) Viewed 854 times
7. Input output module for solenoid valve types device
KZJ-956input-output-module(for solenoid valve types device).jpg
KZJ-956input-output-module(for solenoid valve types device).jpg (56.97 KiB) Viewed 854 times
8. Multi-line control unit
multi-line device control unit(fan pump).jpg
multi-line device control unit(fan pump).jpg (63.81 KiB) Viewed 854 times
Shop Focus brand wireless alarm, HB solar power alarm, HST fire alarm at https://www.vedardalarm.com

Post Reply