Page 1 of 1

Home security measures

Posted: Wed Apr 08, 2020 7:49 am
by vedard
1. Anti-theft for Windows
When you go out, pull the curtain of the sitting room or bedroom an open seam, block the line of sight with object, make thief thinks there is someone in the home.
Install windows magnetic contact switch. When the window is open, it will trigger alarm.
Install outdoor window wireless solar powered infrared grating.
2. Security method for entry door
Install relatively safe and solid security door
Install door entry CCTV camera
Use a fingerprint lock
Install gate entrance light wall wireless solar powered PIR detector
3. Anti-theft method for balcony
Install siren strobe
Install wireless solar power PIR detector
Install wireless solar power photoelectric infrared grating.
4. How to prevent theft on the roof
Install CCTV security camera
Install wireless solar power infrared grating.

What a simple outdoor security intruder alarm

Posted: Mon Nov 02, 2020 12:52 pm
by vedard
Outdoor security system installation is more important than indoor. But due to the harsh environment such as snow, rain, sunlight, the normal outdoor security intruder detector is hard to install and work.
Solar power wireless PIR AIR infrared intruder detector can easy solve the problem. No wiring, no false alarm.
Driveway security, garden security, courtyard security can be guaranteed by solar power PIR.
There are two parts of the system. One is outdoor intrusion sensor solar powered. One is indoor wireless receiver doorbell. AC plug powered with 35 music sounder for selection.
Easy install it with the Demo video guide attached. Download it to watch. Shop at Vedard alarm system store.
T704 to 806A Connect.mp4
(58.95 MiB) Downloaded 440 times

How to ensure security and reliability of security alarm system?

Posted: Fri Nov 20, 2020 1:57 pm
by Jim
1. The alarm host should be installed at hidden place and protected place with detector at the entrance. Otherwise, the theft may unplug the alarm host and disable it.
2. The alarm host should have two communication networks. For example, it has PSTN or TCP/IP as main network and GSM as backup network. So, if one network fails, another network can work to send out alarm message.
3. The network wire for example, the PSTN network telephone line should firstly connect with alarm host, and the extension port connects with telephone. Otherwise, other device such as telephone fault may cause alarm host communication failure.
4. The alarm system wiring cable should be layed in galvanised tube.
5. The alarm host should have backup battery and the battery has sufficient power. Some alarm host backup battery power has been consumed after years and needs replacement.

Re: Home security measures

Posted: Fri Jun 04, 2021 7:20 pm
by johnii
Installing the security camera for home security is the best option, you can watch at any time from anywhere.