The introduction of Power-II alarm host
Posted: Mon Oct 26, 2020 2:05 pm
The second generation of FOCUS anti-theft alarm system adopts the application of embedded system, two-way communication and other technologies. The alarm host has taken a big step towards the development of integration and intelligence, and has become an epoch-making product of anti-theft alarm.
Power-II series is the general name of Focus new generation intelligent two way communication alarm host. Integrated wired, wireless, bus and other system components, making it the best choice in the digital intelligence era! FC-7664 , FC-7458 , FC-7200 alarm host are the representative works of this series.
Features: FOCUS anti-theft alarm system POWER-II series integrates modern intelligent technology, supports PSTN , GSM , TCP/IP , 3G/4G networked alarm; supports multi-interface platform alarm; intelligence, increases the compatibility, versatility and stability of the host . MA-II bus second-generation technology:
Using advanced bus zone coding techniques, multi-dimensional bar code technology random, solved the problem of interference of same system detectors. Multi-thread strengthened. I has self-loop (loop-back) detection to eliminate signal reflection, enhance signal attenuation, etc. Unique performance. Support includes a multi-node distance and other characteristics of high sensitivity reception, transmission distance is up to 1.2Km . Data frame detection makes it possible to achieve better transmission quality while ensuring the basic data load.
CAN-BUS bus: the CAN (the Controller Area the Network) that is a controller area network , one kind of distribution control supported real-time control and serial communication network, because of its high performance, high reliability, and unique design, It can realize the resource sharing and joint defense control of the regional machine through information interaction. the nodes on the bus can be plug and play, so the scalability of the system is better; and any node on the CAN bus except the centralized machine can be added or deleted without any impact caused on other nodes.
POWER-II control alarm:
Alarm host ( Burglar Alarm Control), using the product of industrial design special alarm mode, using 16 bit high-speed single-chip, embedded system design, the system is more stable and reliable. PSTN , GSM , TCP/IP alarms are added on the traditional basis , and the alarm system can be restored remotely. It can also be equipped with meian’s free remote service platform ( TCP/IP network transmission) for alarm network control and local remote diagnosis. And other functions make POWER-II keep up with the trend of the times.
Power-II series is the general name of Focus new generation intelligent two way communication alarm host. Integrated wired, wireless, bus and other system components, making it the best choice in the digital intelligence era! FC-7664 , FC-7458 , FC-7200 alarm host are the representative works of this series.
Features: FOCUS anti-theft alarm system POWER-II series integrates modern intelligent technology, supports PSTN , GSM , TCP/IP , 3G/4G networked alarm; supports multi-interface platform alarm; intelligence, increases the compatibility, versatility and stability of the host . MA-II bus second-generation technology:
Using advanced bus zone coding techniques, multi-dimensional bar code technology random, solved the problem of interference of same system detectors. Multi-thread strengthened. I has self-loop (loop-back) detection to eliminate signal reflection, enhance signal attenuation, etc. Unique performance. Support includes a multi-node distance and other characteristics of high sensitivity reception, transmission distance is up to 1.2Km . Data frame detection makes it possible to achieve better transmission quality while ensuring the basic data load.
CAN-BUS bus: the CAN (the Controller Area the Network) that is a controller area network , one kind of distribution control supported real-time control and serial communication network, because of its high performance, high reliability, and unique design, It can realize the resource sharing and joint defense control of the regional machine through information interaction. the nodes on the bus can be plug and play, so the scalability of the system is better; and any node on the CAN bus except the centralized machine can be added or deleted without any impact caused on other nodes.
POWER-II control alarm:
Alarm host ( Burglar Alarm Control), using the product of industrial design special alarm mode, using 16 bit high-speed single-chip, embedded system design, the system is more stable and reliable. PSTN , GSM , TCP/IP alarms are added on the traditional basis , and the alarm system can be restored remotely. It can also be equipped with meian’s free remote service platform ( TCP/IP network transmission) for alarm network control and local remote diagnosis. And other functions make POWER-II keep up with the trend of the times.