Glass Break Detector FG-2035 Installation

Meian tech Focus brand wireless smart home automatic burglar alarm, emergency alarm, remote monitor system for home security. How to program the wireless alarm system? Learn it here.
Post Reply
vedard
Posts: 407
Joined: Wed Dec 05, 2018 12:27 am

Glass Break Detector FG-2035 Installation

Post by vedard »

FG-2035 Glass break detector can be installed on flush (single gang box) or surface wall/ ceiling. Both low frequency "flex" and high frequency "shatter" sound can be detected. It will detect the breaking of most common types of framde glass panes and with free false alarm. Minimum size for all types of glass: 30cm*30cm (12"*12")
Thickness plate: 3.2mm-6.4mm (1/8"-1/4") tempered. laminated wired 64 mm (1/4")
It will not alarm if glass pane broken from inside or glass dropped on floor.
FG-2035.pdf
(168.25 KiB) Downloaded 47 times
Shop Focus brand wireless alarm, HB solar power alarm, HST fire alarm at https://www.vedardalarm.com

vedard
Posts: 407
Joined: Wed Dec 05, 2018 12:27 am

Glass Break Detector FG-2036R Installation

Post by vedard »

Home Security System Glass break detector Focus brand Alarm control panel compatible wireless security sensor and alarm accessory
Twin-stage potentiometer.
Built in audio analysis of microprocessor.
With anti-tamper function, networking alarm output.
Introduction
Twin-stage potentiometer.
Built in audio analysis of microprocessor.
With anti-tamper function, networking alarm output.
Working current: 12.5mA
Working voltage: 2*3V CR123 lithium battery supply
Response time:<20S
Shop Focus brand wireless alarm, HB solar power alarm, HST fire alarm at https://www.vedardalarm.com

Post Reply