Page 1 of 1

Electrical fire monitoring system

Posted: Sat Jan 08, 2022 9:23 am
by vedard
Electrical fire monitoring system includes residual current detectors with various types and rated current and monitor panel.
JB-DH-5600_Manual1578634976882.pdf
(14.25 MiB) Downloaded 251 times
electrical fire monitoring system.jpg
electrical fire monitoring system.jpg (160.95 KiB) Viewed 1862 times
JB-DH-5600 is addressable 1 loop or 2 loop with 255 points for each loop electrical fire monitoring device. It works with residual current detectors and monitor the electrical system in real time. The open circuits, short circuits or communication faults of any loop control device will be reported to the control panel. It is easy and reliable to monitor and maintain the electrical system to avoid electrical fire.

Combined Electrical fire monitoring detector

Posted: Sun Jan 09, 2022 3:24 pm
by vedard
he detector can work independently or connect with JB-DH-TC5600 electrical fire monitoring equipment through two bus circuits, and realize the functions of leakage detection, temperature detection and output control. It works stably and reliably, and is connected with a variety of residual current transformers according to the magnitude of the over-line current.

Features
1.The Detector and the Electrical Fire Monitoring Equipment use non-polarized two-line system to connect. With mature technology, it is reliable in communication and convenient in cabling.
2. The Detector uses a high-performance CPU, intelligent algorithm and watchdog technology, highly efficient and reliable.
3. The Detector has a built-in passive output control which can connect with one or two loops to alarm leakage.
4. The Detector has the function of self-test which can test the screen and squealers working normally or not.
5. The Detector can set the residual current from 200mA to 1000mA of residual current transformers, which is high- precision detecting and widely used. It can be programmed with address and convenient for commission and maintenance.
6. The alarming temperature can be set from 45℃ to 140℃, high-precision detecting and widely used. It is convenient for commission and maintenance by the setup of addressable code and temperature.
TC-DH230_Manual.pdf
(651.83 KiB) Downloaded 228 times
TC-DH230.jpg
TC-DH230.jpg (24.52 KiB) Viewed 1854 times