Installation notes for solar wireless beam
Posted: Mon Mar 16, 2020 3:09 am
1. The solar wireless beam should be installed outdoor.
2. The solar wireless beam should not be installed at dark place. If the maximum illumination of the installed place is less than 2000LX during the day, external power cord should be connected.
3. The solar wireless beam is not suitable for use in places such as gate passageway where the alarm is triggered more than 20 times a day. But there is low power comsumption outdoor detector such as HB-T704 and HB-T705 can be used.
4. In order to enable infrared light to send to longer distance, this product is designed with a smaller Angle of light, so it needs to be more accurate in light matching during installation, and the mounting bracket is required to be firm and not shaken, otherwise it may cause failure. You can use laser pointer to calibrate the beams.
2. The solar wireless beam should not be installed at dark place. If the maximum illumination of the installed place is less than 2000LX during the day, external power cord should be connected.
3. The solar wireless beam is not suitable for use in places such as gate passageway where the alarm is triggered more than 20 times a day. But there is low power comsumption outdoor detector such as HB-T704 and HB-T705 can be used.
4. In order to enable infrared light to send to longer distance, this product is designed with a smaller Angle of light, so it needs to be more accurate in light matching during installation, and the mounting bracket is required to be firm and not shaken, otherwise it may cause failure. You can use laser pointer to calibrate the beams.