What to do with Fire alarm and How to recover alarm devices

Business security, commercial security, hotel security, factory security, industry security solution.
vedard
Posts: 837
Joined: Wed Dec 05, 2018 12:27 am

What to do with Fire alarm and How to recover alarm devices

Unread post by vedard »

Part1. What to do with fire alarm? When fire alarm is reported, keep calm and have someone check the alarm spot immediately. If fire is confirmed and still at start stage, use the fire extinguisher to extinguish fire immediately. If the fire has spread and hard to extinguish, People should be be organized immediately to evacuate away from the fire disaster area.Call fire police and trigger fire automatic fighting system.
Part2. Recover fire alarm devices after fire extinguishing.
1.Recover smoke detector: If the fire alarm is triggered by smoke detector, the smoke detector should be recovered after fire is extinguished. Remove the alarmed smoke detector, clean it and re-install it. Then click “reset” key on the alarm control panel and the fire alarm system will continue working.
2.Recover manual call point: If the fire alarm is triggered by manual call point, then use the call point key to reset it. Click “ reset” key on the alarm control panel and the fire alarm system will continue working.
3.Reset electric cutting switch. When fire alarm is triggered, the fire alarm system will automatically cut off non-fire power. So, after fire is extinguished, click “reset” key on fire control panel, then put the power switch off, again put the power switch on. The electric power will work as normal.
Fire alarm system is professional security equipment and should be operated by professionals. Fire security alarm system guidance, trainning or fire regulations are available at vedardalarm.
Read more articles about Fire alarm system illustration, how to set up fire alarm system, fire alarm system troubles and solution.
Shop Focus brand wireless alarm, HB solar power alarm, HST fire alarm at https://www.vedardalarm.com
ImogenedaP
Posts: 5
Joined: Wed Aug 21, 2019 6:25 am

What to do with Fire alarm and How to recover alarm devices

Unread post by ImogenedaP »

Many years ago I got one of those stainless steel fire extinguishers that has water and compressed air in it.

I have used it several times and put out some good fires with it. I refill it and continue to use it to this day.

best dang fire extinguisher in the world.
AysSystemInc
Posts: 1
Joined: Sat Feb 06, 2021 6:53 am

Re: What to do with Fire alarm and How to recover alarm devices

Unread post by AysSystemInc »

A smoke detector is not really a smoke detector, a smoke detector senses particles in the air and causes the particles to smoke. Too much moisture in the detector may also cause the detector to be alarmed. At this stage, most smoke detectors often switch the red light on to show you where the alarm is coming from.

The security company only controls the alarm system at home. When there is a fire or burglary warning, the security system can pick up the phone and call the alarm provider to say "Fire" or "Burglary." And the system is going to hang up the phone.

The alarm company will then call you, not your fire/burst system, to check if you are OK. They talk to you, but they don't have the power to do anything about your fire/burst system at all, you have to reset the system yourself.
Post Reply