How to properly handle explosion-proof gas detector alarm?

Business security, commercial security, hotel security, factory security, industry security solution.
vedard
Posts: 855
Joined: Wed Dec 05, 2018 12:27 am

How to properly handle explosion-proof gas detector alarm?

Unread post by vedard »

When the explosion-proof gas detector alarms, the detected gas value is still lower than the explosion value. It is necessary to dispose of it in a timely and correct manner to avoid explosion.
Firstly, check the display screen on the alarm control panel, find the detector that is sounding the alarm, confirm the gas type, concentration, and location of the alarm detector.
Immediately stop the operation of the source of ignition that could cause an explosion. For example, turning off electrical equipment and prohibiting open flames.
If gas leakage causes an alarm, the alarm controller will automatically turn on the ventilation equipment, such as exhaust fans, ventilation ducts, etc to strengthen ventilation and air exchange and reduce the concentration of hazardous gases.
Secondly, notify relevant personnel immediately.
And arrange personnel to go to the alarm area to check the situation while ensuring proper protection. Determine if there is a gas leak or other abnormal condition.
Thirdly, record in detail the alarm time, alarm area, alarm value, measures taken, and inspection results.
Fourthly, the alarm host can only be reset after it is confirmed that the alarm was triggered by mistake and the dangerous situation has been eliminated.
In conclusion, after the gas alarm, personnel operations need to be carried out in accordance with regulations to safeguard the safety production of enterprises.
Shop Focus brand wireless alarm, HB solar power alarm, HST fire alarm at https://www.vedardalarm.com
Post Reply