 |
| HOME |
|
PRODUCTS |
ABOUT US |
|
FAQ |
CONTACT US |
|
|
| |
Home/Commercial Alarm System |
|
|
| |
Model No. KS-858 |
|
 |
 |
| Communications: |
| 1. Supports ADEMCO CONTACT ID and KS6+2 monitoring center communication protocol. |
| 2. Dial 5 telephone numbers (mobile and pager number); dialing type (tone or pulse) and appointed communication zone can be programmed; alarm telephone is priority. |
| 3. Option for ARM/DISARM and system status report or not. |
| 4. Phone line cut or short-circuit will send an alarm (indicator or siren for optional) |
| 5. Wired zone respond speed: 5ms - 1,000ms; supports normal open, normal close and end- of-line resistance at freedom. |
| 6. Main unit disassembly, slave detector disassembly, AC power cut, backup battery lower and slave detector power lower will activate alarm. |
| 7. Work with wired/wireless siren and linkage device. |
| 8. Latest 30 pieces alarm (month/day/hour/minute) can be recorded and can not be deleted; last arm/disarm time can be remembered. |
| 9. Main unit and wireless PIR detector make communication times in 26 hour to check if there is communication malfunction; if there is a malfunction, the main console will alert corresponding zone within 26 hours |
| 10. Slave detector sends report to main unit for on/off; the report will be remembered in record. |
| |
| Automations: |
| 1. 16-zone (8 wireless and 8 wired) with 4 x 4 keyboard and lattice LCD display. |
| 2. Voice pre-recorded. |
| 3. 8 partitions can be programmed independently; 8 remote controllers and 8 user codes can be programmed for 8 partition to ARM/DISARM independently. |
| 4. Access codes, 1 installer code, 1 master code, 8 common user code and duress code. |
| 5. Remote arm, disarm, monitor, and on-site alarm setup. |
| 6. Automatically register between wireless PIR detector, remote controller and main console (8 wireless can up to 24 zones, and 8 remote controllers). |
| 7. Zone attribute can be program for fire alarm, medical alarm, emergency alarm at freedom; each zone can be programmed with different remote control. |
| 8. Two timers can be set to arm/disarm independently. |
| 9. Alarm delay (00 - 99 seconds) and arm delay (00 - 99 seconds) can be set for appointed zones. |
| 10. Both AC 220V and 12V, 7Ah rechargeable battery power supplied; and change automatically; the backup battery can work 24 hours or more in standby. |
| 11. Battery lower power alert and discharge protection. |
| 12. Telephone lightningproof. |
| |
| |
| Specifications: |
| Input Power: |
AC220V¡À15%, Battery: 12V/7Ah |
AUX output current: |
£¼550mA |
Siren Output Current: |
£¼1.5A |
| Total Output Current: |
¡Ü1.5A |
Frequency: |
433.92MHz |
Alarm decibel: |
¡Ý80dB within 1m |
| Working Temperature: |
0¡æ¡«55¡æ |
Relative Humidity: |
40-70% |
Communication Distance between PIR detector and alarm unit: |
¡Ý400m(in open area) |
| Communication Distance between wireless door sensor and alarm unit |
¡Ý200m (in open area) |
Communication Distance between wireless siren and alarm unit |
¡Ý400m (in open area) |
|
|
|
| |
| Items included in standard set: |
| 1 set of KS-858 alarm panel, 2pcs KS-13 Wireless remote controller, 1pc Antenna, 2pcs Keys, 1pc Power Lead |
| |
| Other accessories for optional: |
| SS-168 wireless smoke sensor, KS-21AF transeiver, KS-307DCT PIR detector, KS-21AW motion sensor, KS-70A indoor siren, KS-70B outdoor siren, MT-338A-E4 Wireless Gas Sensor, wired detectors etc. |
| |
| User's Manual Download: |
| KS-858E User's Manual.pdf |