The home security system

How to make home security solution? What type of security system should I choose? Should I DIY Home security or have monitor company make it?
Post Reply
vedard
Posts: 303
Joined: Wed Dec 05, 2018 12:27 am

The home security system

Post by vedard » Tue Jan 15, 2019 9:09 am

1. Alarm Control Panel
Alarm Control Panel is the heart of the complete home security system. It is microwave process system control center. All detectors signal and status will be monitored and identified by alarm control panel. Then the alarm control panel will send feedback, notification and alarm report to set phones or app, message, email.
Install Alarm Control Panel:
1. Choose the place for alarm control panel placement.
At center of all detectors (within the wireless receiving distance 100m). At hidden place. The alarm control panel should be put 0.5 m above the ground to avoid interference.
2. Wire communication line such as telephone line or RJ45 TCP/IP internet line.
3. Connect wired siren to the alarm panel output siren interface if you need it.
4. Connect the AC power supply. Switch on the power, the alarm control panel will start to work. Start to set alarm record or notification phone number etc. for the alarm panel. If no alarm recording message is set, the panel will sound beep every 30seconds.
Setting Alarm Control Panel via below various ways. You can choose the easy way to set it.
1. Set the alarm control panel via built-in LCD keypad on panel.
2. Set the alarm control panel via telephone.
3. Set the alarm control panel via SMS (GSM alarm panel)
4. Set the alarm control panel via IE browser
5. Set the alarm control panel via smart phone app

2.Remote controller
The remote controller has functions of arm, disarm, emergency button.

3. Door contact
Door contact has magnetism part and wireless transmitter part. If the two parts are separated to a defined distance 1.5cm it will trigger alarm.

4. PIR and PIR & MW detector Motion Sensor
There are wide angle PIR and curtain PIR, ceilling mounted PIR three types. PIR infrared sensor is with shortage of easy for interference by air flow and will cause missing alarm for glass and wood blocking. So, Microwave detector is add to PIR for more reliable detection and accurate alarm.

5. Infrared photoelectric beam sensors.
Beams sensors consists of transmitter and receiver as invisible light wall. And it is installed outdoor for first place intrusion prevension and alarm.
Shop Focus brand wireless alarm, HB solar power alarm, HST fire alarm at https://www.vedardalarm.com

vedard
Posts: 303
Joined: Wed Dec 05, 2018 12:27 am

What is home security system and how does it work

Post by vedard » Sat Feb 02, 2019 8:51 am

What is home security system?
Home security system is network electronic device including various sensors and alarm control panel, siren strobe etc. With new technology of mobile app, pop message and sms, voice message, the alarm security system can be monitored easy.
Mobile app for home security system largely enables the setting and operation of the home security system. Not need to remember programming codes. In setting menu, you can enroll your alarm panel to the manufacturer's server. It will show online, normal network. (Code will be showed if it can not be connected to server). Why the app can not be connected to server? There are few reasons. 1. Your country GSM/GPRS network is not supported by the alarm system control panel. 2. The app authority is not set on for your network. 3. The app is under conflict with your other apps. For example, android google software may have conflict with the home security system app.
What to do if the app can not connect to network?
1. Check with your country GSM /GPRS operator and make sure it is allowed to run the app. Check the manufacturer and make sure your country network is supported.
2. Make sure the network authority is set on for the app.
3. Make sure your mobile setting is allowed to install and run the app.
Shop Focus brand wireless alarm, HB solar power alarm, HST fire alarm at https://www.vedardalarm.com

HenryPeaNt
Posts: 6
Joined: Thu Mar 07, 2019 4:18 am
Location: Sri Lanka
Contact:

The home security system

Post by HenryPeaNt » Thu Mar 21, 2019 4:21 am

What are the features of the "ideal modern home intercom system"?
Without that, hard to say if it exists.

ronaldbaw
Posts: 2
Joined: Thu Apr 11, 2019 9:48 am

The home security system

Post by ronaldbaw » Tue Apr 16, 2019 6:55 am

It looks like the SC1200 is seeing 6 zones but I only have 5 zones. Is there any way to delete that extra zone?

Marlenesig
Posts: 5
Joined: Sun Aug 25, 2019 3:07 pm
Location: Honduras
Contact:

The home security system

Post by Marlenesig » Sat Oct 19, 2019 9:32 am

the Pioneer Susano doesnt do Front Height and Ive already bought the speakers for this, i.e. a 9.1 system, so it is a "must have" rather than a "nice to have"
Attachments
219.gif
219.gif (2.91 KiB) Viewed 245 times

User avatar
Emmaeva9018
Posts: 4
Joined: Mon Jun 17, 2019 9:02 am

Re: The home security system

Post by Emmaeva9018 » Mon Oct 21, 2019 10:59 am

Wireless Burglar Alarms is a device that emits a loud noise when someone is entering a premise without permission. Furthermore, sensors placed on the doors of a home ensure that every possible way of getting into a home is protected. In contrast, Secure My Place wireless burglar alarm models can detect opening and shocks on doors and windows in your property. Our Wireless burglar alarms are connected to your mobile application and it provides access to your house remotely. If Alarm triggers the mobile app makes a loud noise just like an alarm to alert home and business owner about possible intrusion

Post Reply