The solar beam can not be enrolled with alarm panel

Business security, commercial security, hotel security, factory security, industry security solution.
Post Reply
vedard
Posts: 303
Joined: Wed Dec 05, 2018 12:27 am

The solar beam can not be enrolled with alarm panel

Post by vedard » Wed Jun 26, 2019 8:29 am

The solar beam can not be enrolled with alarm panel. What is the problem?
Please check whether or not the receiver terminal (S) alarm led indicator is lit up when all infrared holes are blocked. (At the step of enroll with alarm panel).
1. If the led is lit up, but can not enroll with alarm panel, then it is problem of the solar beam or alarm panel. Replace a panel or wireless device such as door contact, remote controller or PIR, emergency button to check.
2. If the led is not lit up, that means no signal is sent. Cause 1. One or both terminals are not powered on. Need to press the power on button and keep for a while to ensure it is powered on. Cause 2. The battery voltage is low and can not work after power on. If so, need to charge the battery in a sunny place.
Shop Focus brand wireless alarm, HB solar power alarm, HST fire alarm at https://www.vedardalarm.com

Post Reply