How to operate Fire Alarm Control Panel?

Commercial fire alarm, public fire security alarm and fire automatic fighting system installation and operation.
vedard
Posts: 837
Joined: Wed Dec 05, 2018 12:27 am

How to operate Fire Alarm Control Panel?

Unread post by vedard »

What should you do if the fire alarm control panel alarms?
1. Press "Mute" key on the fire alarm panel. Then check the fire location displayed on the fire alarm control panel. Ask the patrol to verify it.
2. If the fire is verified, start the sound and light alarm device to send out the alarm sound to remind the people on the spot.
3. Call fire police center for help.
4. Start fire extinguishing equipment.

If the fire alarm is not a real one, what should you do?
Check the fire alarm zone(for conventional fire alarm system), check and find out the fault detector. Replace it or repair it.
Shop Focus brand wireless alarm, HB solar power alarm, HST fire alarm at https://www.vedardalarm.com
BarryCat
Posts: 6
Joined: Fri Jun 28, 2019 2:28 am

How to operate Fire Alarm Control Panel

Unread post by BarryCat »

My church has 3 Gamewell fire alarm panels not security related, each panel has 2 7ah batteries. The alarm company we use says the batteries are good for 24 hours after a power failure. The church wanted longer, so the alarm company came back with a
martino222
Posts: 1
Joined: Fri Oct 11, 2019 3:06 am

Re: How to operate Fire Alarm Control Panel?

Unread post by martino222 »

Walk Through Metal Detector can detect the extremely small metals hidden inside the human body such as small blades, paper clips, electronic chip etc. This kind of metal detector is widely used in airport, railway station, subway station, workshop, big exhibition etc.
There are many best security equipment for sale. Please contact us soon at www.jkdcsecurity.com
Post Reply