Networking Alarm System

Perimeter Security system wireless solar power photoelectric beam system installing instruction. Video guidance and user manual for setting up solar power beam system for outdoor yard, wall, balcony security protection.
vedard
Posts: 837
Joined: Wed Dec 05, 2018 12:27 am

Networking Alarm System

Unread post by vedard »

Networking Alarm System consists of Alarm Center Software and User Alarm Devices. The system using Internet communication,and we have our own Internet Server,so the system is much more intelligent and stable, the responds time will be shorter.
Alarm Center Software can realize Baidu Map,Electric Map and Video Surveillance functions. User Alarm Devices are Solar and Wireless,using GPRS/WiFi/LAN to report the alarm information to the alarm center and the user,and the alarm center and the user also can remote control the user alarm devices by Software and App.
[attachment=0]network alarm.jpg[/attachment]

Security service center can choose to build their own server or not. If not, just install the software we provided on the monitor PC. The alarm message sent from alarm control panel to alarm receive PC directly.
Attachments
network alarm.jpg
network alarm.jpg (64.4 KiB) Viewed 8088 times
Last edited by vedard on Fri Mar 06, 2020 8:26 am, edited 1 time in total.
Shop Focus brand wireless alarm, HB solar power alarm, HST fire alarm at https://www.vedardalarm.com
vedard
Posts: 837
Joined: Wed Dec 05, 2018 12:27 am

Re: Networking Alarm System Alarm Center Manual

Unread post by vedard »

Connect All your security sensors and alarm control panel to alarm center. Alarm center will monitor the whole security system via windows software. Just install the software on PC, register the equipment to the center. There is electric map to show all alarm information.
Alarm Center Manual.pdf
(823.59 KiB) Downloaded 623 times
Shop Focus brand wireless alarm, HB solar power alarm, HST fire alarm at https://www.vedardalarm.com
vedard
Posts: 837
Joined: Wed Dec 05, 2018 12:27 am

Long range alarm repeater manual

Unread post by vedard »

HB-ZFQ is used for wireless long range repeater. It can prolong the wireless transmission distance to 800-1000m with one repeater.
Attachments
User Manual for HB-ZFQ 433MHz FM signal transpond.pdf
(2.8 MiB) Downloaded 451 times
Shop Focus brand wireless alarm, HB solar power alarm, HST fire alarm at https://www.vedardalarm.com
vedard
Posts: 837
Joined: Wed Dec 05, 2018 12:27 am

Is it possible to have different tone for each sensor

Unread post by vedard »

Yes, different sensor can have different tone,please setup as below:
1. activate the first sensor
2. press the "Tone" button to select a tone for the first sensor.
3. activate the second sensor
4. press the "Tone" button to select a tone for the second sensor. ”
Shop Focus brand wireless alarm, HB solar power alarm, HST fire alarm at https://www.vedardalarm.com
vedard
Posts: 837
Joined: Wed Dec 05, 2018 12:27 am

NEED a volume control on the receiver

Unread post by vedard »

Actually, the volume of the receiver is adjustable, please operate as below:
1. power on the receiver
2. press and hold the ON/OFF button first, and then press the "Tone" button once to adjust the volume level, total 4 volume levels adjustment.
Hope it helps and please contact us if any other questions. ”
Shop Focus brand wireless alarm, HB solar power alarm, HST fire alarm at https://www.vedardalarm.com
vedard
Posts: 837
Joined: Wed Dec 05, 2018 12:27 am

Re: Networking Alarm System

Unread post by vedard »

485 network TCP/IP communication module can be added to the alarm control panel.
Attachments
网络模块配置工具使用说明精简版V1.7.3.pdf
network module configure
(738.95 KiB) Downloaded 490 times
Shop Focus brand wireless alarm, HB solar power alarm, HST fire alarm at https://www.vedardalarm.com
Post Reply