Page 1 of 1

Wireless Alarm Panels

Posted: Wed Jan 16, 2019 8:32 am
by vedard
Intelligent Alarm Panel(HB-BJQ-560)
Features:
◆560 wireless zones and 4 wired zones.
◆LCD display;Touch screen; easy operation
◆GSM/PSTN Optional;Support Ademco contact ID
◆Alarm mode optional:site alarm, PSTN alarm, GSM alarm, SMS alarm
◆128 alarm records existed
◆4-group user number and 2-group alarm center number can be set
◆Troubleshooting tips(low battery,invalid,battery damaged and etc)
◆4 types of alarm voices optional;alarm volume adjustment;
GSM Alarm.jpg
GSM Alarm.jpg (120.73 KiB) Viewed 9821 times
Technical Parameters
Working Voltage AC220V±15% 50Hz,DC12V-13.8V
Working Current Static Current≤100mA,Alarming Current≤350mA
Working Temperature Range -10—55℃ ;Moisture Rate:40—70%
Dial Mode
Double Audio:
High Frequency Group Level:-7±2dBm
Low Frequency Group Level:-9±2dBm
Wireless Frequency 433MHz FSK+FHSS
Backup Battery AA Ni-MH Battery (10ps)
Weight 2.1kg
Dimension 280×180×74(mm)

Engineering Alarm Panel(HB-G250)

Posted: Wed Jan 16, 2019 8:33 am
by vedard
Engineering Alarm Panel(HB-G250)
Features:
◆992 wireless zones and 8 wired zones.
◆Keyboard operation.
◆Support Ademco contact ID
◆6 zone type optional:Normal,Part,Doorbell,Shield,Bypass,Emergency.
◆1 group user password and 1 group setup password(can be reset)
◆PSTN Module;2-group user number and 2-group alarm center number can be set
◆Troubleshooting tips(low battery,invalid,battery damaged and etc)
◆Has RS-485 port and RS-232 port,used to linkage the CCTV and electric map.
20109159085351.jpg
20109159085351.jpg (3.33 KiB) Viewed 9819 times
Technical Parameters
Working Voltage AC220V±10% 50Hz,DC12V-13.8V
Working Current Static Current≤100mA; Alarming Current≤350mA
Working Temperature range -10—55℃ ,Moisture Rate:40—70%
Dial Mode Double Audio:
High Frequency Group Level:-7±2dBm
Low Frequency Group Level:-9±2dBm
Wireless Frequency 433MHz FSK+FHSS
Standby Battery DC12V7Ah
Weight 2.5kg
Dimension 265×260×80(mm)

Multi-functional RF Receiver(HB-MFR)

Posted: Wed Jan 16, 2019 8:35 am
by vedard
Multi-functional RF Receiver(HB-MFR)
Features:
◆4 wireless zones.(each zone can connect 8 pieces detectors)
◆Each zone has special alarm voice.
◆alarm volume can be adjustable.
◆4 NO/NC relay outputs(responding 4 wireless zones),used to compatible with other alarm system
◆Relay output duration can be set(1second,10seconds,60seconds and 5 minutes)
◆1 group DC14V output
hb-mfr-433mhz-multifunctional-rf-receiver.jpg
hb-mfr-433mhz-multifunctional-rf-receiver.jpg (88.02 KiB) Viewed 9819 times
Technical Parameters
Working Voltage DC12- 15V
Working Current Static Current 20mA; Alarming Current 180mA
Wireless Frequency 433MHz FSK+FHSS
DC14V Output Current Maximum 400mA
Relay Output Rating DC24V/AC120V at 2A
Dimension 160×110×40(mm)

Solar&Wireless Alarm Panel(HB-JHD-3)

Posted: Wed Jan 16, 2019 8:37 am
by vedard
Solar&Wireless Alarm Panel(HB-JHD-3)
Features
◆32 wireless zones.
◆Battery Powered&Solar Charged,no need cables.
◆433MHz Receiving Module inside.
◆Loud Alarm Voice and LED blinking.
◆Outdoor use and waterproof(IP66)
◆Use remote control to arm or disarm
◆Total 4 setting buttons,easy operation
siren.jpg
siren.jpg (6.03 KiB) Viewed 9819 times
Technical Parameters
Working Voltage 3.3V
Battery Type Chargeable LiFePO4 Battery
Battery Capacity 500mAh
Static Current ≤ 2mA
Wireless Frequency 433MHz FSK+FHSS
Working Temperature Range -30℃~70℃
LED Luminous Flux 70lm
Alarm Volume 90 db
Weight 1.6kg
Dimension 280×180×74(mm)

Re: Solar&Wireless Alarm Panel(HB-JHD-3)

Posted: Tue Aug 27, 2019 7:48 am
by vedard
vedard wrote: Wed Jan 16, 2019 8:37 am Solar&Wireless Alarm Panel(HB-JHD-3)
Features
◆32 wireless zones.
◆Battery Powered&Solar Charged,no need cables.
◆433MHz Receiving Module inside.
◆Loud Alarm Voice and LED blinking.
◆Outdoor use and waterproof(IP66)
◆Use remote control to arm or disarm
◆Total 4 setting buttons,easy operation
siren.jpg
Technical Parameters
Working Voltage 3.3V
Battery Type Chargeable LiFePO4 Battery
Battery Capacity 500mAh
Static Current ≤ 2mA
Wireless Frequency 433MHz FSK+FHSS
Working Temperature Range -30℃~70℃
LED Luminous Flux 70lm
Alarm Volume 90 db
Weight 1.6kg
Dimension 280×180×74(mm)
There are two sound options for the solar power wireless siren strobe.
You can set it.
Click power off 3 times to power off the siren strobe. Then power on again. Click TONE one time to switch the sound mode ( siren loud sound or door bell sound). Or you can click the remote controller mute button to switch the sound mode.

Interconnection wireless alarm system

Posted: Sat Jun 05, 2021 3:14 pm
by vedard
This is wireless interconnection alarm panel with wireless communication distance 2000m (6557 feet). It has built-in repeater, so, if the
first alarm goes off, it send out alarm as well, other alarm panel will go off immediately and send out alarm. So, all the interconnected
alarm host will go off.
You can set maximum 99 interconnected alarm host.
So, the wireless interconnection alarm system can be used for campus emergency alarm, factory alarm, shopping mall security service for burglar alarm or fire alarm.
HB-2020AC.pdf
(266.43 KiB) Downloaded 318 times