Networking Alarm System

Perimeter Security system wireless solar power photoelectric beam system installing instruction. Video guidance and user manual for setting up solar power beam system for outdoor yard, wall, balcony security protection.
Post Reply
vedard
Posts: 275
Joined: Wed Dec 05, 2018 12:27 am

Networking Alarm System

Post by vedard » Wed Jan 16, 2019 9:29 am

Networking Alarm System consists of Alarm Center Software and User Alarm Devices. The system using Internet communication,and we have our own Internet Server,so the system is much more intelligent and stable, the responds time will be faster.
Alarm Center Software can realize Baidu Map,Electric Map and Video Surveillance functions. User Alarm Devices are Solar and Wireless,using GPRS/WiFi/LAN to report the alarm information to the alarm center and the user,and the alarm center and the user also can remote control the user alarm devices by Software and App.
network alarm.jpg
network alarm.jpg (64.4 KiB) Viewed 162 times
Shop Focus brand wireless alarm, HB solar power alarm, HST fire alarm at https://www.vedardalarm.com

vedard
Posts: 275
Joined: Wed Dec 05, 2018 12:27 am

Re: Networking Alarm System Alarm Center Manual

Post by vedard » Wed Jan 23, 2019 9:36 am

Connect All your security sensors and alarm control panel to alarm center. Alarm center will monitor the whole security system via windows software. Just install the software on PC, register the equipment to the center. There is electric map to show all alarm information.
Alarm Center Manual.pdf
(823.59 KiB) Downloaded 5 times
Shop Focus brand wireless alarm, HB solar power alarm, HST fire alarm at https://www.vedardalarm.com

vedard
Posts: 275
Joined: Wed Dec 05, 2018 12:27 am

Long range alarm repeater manual

Post by vedard » Tue Feb 12, 2019 8:18 am

HB-ZFQ is used for wireless long range repeater. It can prolong the wireless transmission distance to 800-1000m with one repeater.
Attachments
User Manual for HB-ZFQ 433MHz FM signal transpond.pdf
(2.8 MiB) Downloaded 4 times
Shop Focus brand wireless alarm, HB solar power alarm, HST fire alarm at https://www.vedardalarm.com

vedard
Posts: 275
Joined: Wed Dec 05, 2018 12:27 am

Is it possible to have different tone for each sensor

Post by vedard » Mon Mar 04, 2019 8:46 am

Yes, different sensor can have different tone,please setup as below:
1. activate the first sensor
2. press the "Tone" button to select a tone for the first sensor.
3. activate the second sensor
4. press the "Tone" button to select a tone for the second sensor. ”
Shop Focus brand wireless alarm, HB solar power alarm, HST fire alarm at https://www.vedardalarm.com

vedard
Posts: 275
Joined: Wed Dec 05, 2018 12:27 am

NEED a volume control on the receiver

Post by vedard » Mon Mar 04, 2019 8:48 am

Actually, the volume of the receiver is adjustable, please operate as below:
1. power on the receiver
2. press and hold the ON/OFF button first, and then press the "Tone" button once to adjust the volume level, total 4 volume levels adjustment.
Hope it helps and please contact us if any other questions. ”
Shop Focus brand wireless alarm, HB solar power alarm, HST fire alarm at https://www.vedardalarm.com

Post Reply